Other Functions; Adjusting The Sound Characteristics; Attenuating The Sound; Registering A Surround Menu Onto Each Disc - Sony WX-C770 Manual De Instrucciones

Other Functions

Adjusting the sound
characteristics
You can balance and fader.
1
Select the item you want to adjust by
pressing (SOUND) repeatedly.
Volume (volume) n EQ (equalizer) n
Sub.W (subwoofer volume) n Balance
(left–right) n Fader (front–rear)
2
Adjust the selected item by rotating the
dial.
Adjust within three seconds after selecting
the item. (After three seconds, the dial
EN
functions work as the volume control.)

Attenuating the sound

Press (MUTE) on the optional rotary
commander or optional wireless remote.
"Mute on" flashes momentarily.
To restore the previous volume level, press
(MUTE) again.
Tip
The unit decreases the volume automatically when
a telephone call comes in (Telephone-mute
function).
16
Registering a surround
menu onto each disc

— Disc Sound Memory (DSM)

Once you have registered the desired the
sound characteristics (equalizer and
subwoofer) onto a disc, you can enjoy the same
surround menu every time you play that disc.
You can register them of a maximum of 50
discs.
1
Press (SHIFT), then press (9) (P MODE)
repeatedly until "DSM set" appears.
C D D S M s e t
2
Press (6) (ENTER).
After the DSM setting is complete, the
display goes back to normal playback
mode.
3
Press (SHIFT).
Changing the stored surround
effect
Play the disc whose surround mode you wish
to change, and follow the procedure in

"Registering a surround menu onto each disc."

Erasing the stored surround effect
Press (6) (ENTER) for two seconds in
step 2 of "Registering a surround menu
onto each disc."
C D + D e l e t e +