Playing Tracks Repeatedly - Repeat Play; Playing A Tape In Various Modes - Sony WX-C770 Manual De Instrucciones

Locating the beginning of a track
— Automatic Music Sensor (AMS)
You can skip up to nine tracks at one time.
During playback, press either side of
(SEEK/AMS) momentarily.
SEEK/AMS
To locate the succeeding tracks
To locate the preceding tracks
Note
The AMS function may not work when :
— the blanks between tracks are shorter than four
seconds.
— there is noise between tracks.
— there are long sections of low volume or quiet
sections.
Changing the displayed items
Each time you press (DSPL) during tape
playback, the display changes as follows:
z Tape playback
EN
* While the ATA function is activated.
Playing tracks repeatedly
— Repeat play
You can repeat play the current track.
1
During playback press (SHIFT).
Every time you press (SHIFT), only the
items you can select light up.
REP
2 3 4 5
2
Press (4) (REP) repeatedly until "Repeat
on" appears.
Repeat play starts.
3
Press (SHIFT).
To go back to the normal playback mode,
select "Repeat off" in step 2 above.
12
z Clock z Frequency*
SETUP P MODE
6 7 8 9
Playing a tape in various
modes
You can play the tape in various modes:
•Intro (Intro Scan) lets you play the first 10
seconds of all the tracks.
•NR (Dolby NR) lets you select the Dolby* NR
B system.
•Metal playing CrO
•ATA (Automatic Tuner Activation) turns on
the tuner automatically while fast-winding
the tape.
•B.Skip (Blank Skip) skips blanks longer than
eight seconds.
* Dolby noise reduction manufactured under
license from Dolby Laboratories Licensing
Corporation. "DOLBY" and the double-D symbol
a are trademarks of Dolby Laboratories
Licensing Corporation.
1
Press (SHIFT), then press (9) (P MODE)
repeatedly until the desired play mode
appears.
Each time you press (9) (P MODE), the
item changes as follows:
Intro n NR n Metal n ATA n B.Skip
T A P E
2
Press (10) (n) to select the desired play
mode setting (for example: on or off).
T A P E
Playback starts.
3
Press (SHIFT).
To go back to the normal playback mode,
10
select "off" in step 2 above.
or metal tape.
2
I n t r o o f f
I n t r o o n