Selecting The Equalizer Curve; Selecting The Spectrum Analyzer - Sony WX-C770 Manual De Instrucciones

Selecting the equalizer
curve
You can select from nine equalizer curves.
1
Select a source (tuner, tape, CD or MD
etc.).
2
Press (SOUND) repeatedly until "EQ"
appears.
C D
+ 12
REGRAE
0
- 12
3
Rotate the dial to the selected stored
equalizer curve.
Reggae n Jazz n HipHop n Dance n Ballad
n Classic n User 1 n User 2 n User 3 n
Reggae
After three seconds, the display goes back
EN
to the normal playback mode.
Changing the normal playback
During playback press (EQ).
To change the equalizer curve, press (EQ)
again.
18
E Q : R e g g a e
Selecting the spectrum
analyzer
The sound signal level is displayed on a 13
band spectrum analyzer. You can select from
23 display patterns or you can choose no
display (SA off).
During playback, press (SA) to select a
desired setting.
$
+
12
0
-
12
SA Mode 1
$
+ 12
0
- 12
SA Mode 2
$
+
12
0
-
12
SA Mode 3
$
$
SA Mode 23
$
SA off
Adjusting the spectrum analyzer
level
You can select from three kinds of spectrum
analyzer levels (High, Middle, Low).
During playback, press (SA) for two
seconds.
Each time you press (SA) for two seconds,
the displayed item changes as follows:
" Sens Middle " Sens High " Sens Low