Publicidad
Idiomas disponibles
Idiomas disponibles
ASSEMBLY INSTRUCTIONS
11.
Carefully place the grill body (C) onto cart
left side panel assembly (L) and cart right
side panel assembly (G). Adjust the grill body
(C) so that the holes in the grill body (C) are
aligned with holes in the tabs of cart left side
panel assembly (L) and cart right side panel
assembly (G).
Note: Make sure the natural gas hose
assembly is inside the cart. Secure the grill
body (C) with four M6X16 bolts (AA).
Hardware Used
AA
M6x16 Bolt
12.
Pre-assemble two M6x16 bolts (AA) onto the
cart right side panel assembly (G) and do not
tighten them. Make sure to leave a 5mm gap
between the bolt and the panel. Hang the natu-
ral gas hose bracket onto the bolts and tighten
the two bolts. Put the two-piece natural gas
hose holders (Y) on the hose. Attach the natu-
ral gas hose holders (Y) to the bottom shelf (J)
with two M4x12 bolts (JJ). NOTE: Make sure
the natural gas hose exits through the hole in
the cart rear panel (W).
Hardware Used
AA
M6x16 Bolt
JJ
M4x12 Bolt
11
x 4
12
Hardware Used
x2
AA
M6x16 Bolt
x2
JJ
M4x12 Bolt
x 2
x 2
12
C
C
G
G
AA
5mm
G
J
Y
JJ
W
Y
Y
AA
AA
Publicidad
