Descargar Imprimir esta página

Panasonic CW-XC80HU Instrucciones De Instalación Y Funcionamiento página 6

Publicidad

Idiomas disponibles

Idiomas disponibles

Remote controller
Precaution:
The Remote Controller will not function properly if strong light strikes the sensor window of the
air conditioner or if there are obstacles between the Remote Controller and the air conditioner.
OPERATION
• To turn the air conditioner ON, push the button.
To turn the air conditioner OFF, push the button
again.
• This button takes priority over any other buttons.
• When you first turn it on, the air conditioner is on
the High cool mode and the temp. at 72°F (22˚C).
MODE
• Every time you push this button, it will toggle
between COOL, FAN and DRY.
ON/OFF TIMER
- STOPPING OPERATION
• Every time you push this button, when the air
conditioner is operating, timer is set as follows.
(1Hour ¡ 2Hours ¡ 3Hours ¡ 4Hours ¡ 5Hours
¡ 6Hours ¡ 7Hours ¡ 8Hours ¡ 9Hours ¡
10Hours ¡ 11Hours ¡ 12Hours ¡ O)
• The Setting Temperature will be raised by
2°F (1°C) 30 min. later and by 2°F (1°C) after
another 30 min.
Model: CW-XC80HU
OPERATION
1
TEMP
TIMER
3
MODE
FAN SPEED
2
- STARTING OPERATION
• Every time you push this button, when the air
conditioner is not operating, timer is set as follows.
(1Hour ¡ 2Hours ¡ 3Hours ¡ 4Hours ¡ 5Hours
¡ 6Hours ¡ 7Hours ¡ 8Hours ¡ 9Hours ¡
10Hours ¡ 11Hours ¡ 12Hours ¡ O)
FAN SPEED
• Every time you push this button it is set as follows.
{High(F3) ¡ Low(F1) ¡ Med(F2) ¡ High(F3)...}.
TEMPERATURE SETTING
• This button can automatically control the
temperature of the room.
The temperature can be set within a range of 60°F
to 86°F by 2°F(16˚C to 30˚C by 1˚C). Select the
lower number for lower temperature of the room.
DRY
• When this unit is in dry mode, the fan rotates in
low speed. The fan stops when the compressor
stops cooling.
Approximately every 3 minutes the fan will turn on
and the unit checks the room air temperature to
set itself.
6
5
4

Publicidad

loading