Metra 99-7346B Instrucciones De Instalación página 3

ISO DIN radio provision with pocket
1. Secure the radio brackets to the pocket
with the (4) #8 x 3/8" Phillips screws
supplied. (Figure A)
2. Secure the radio to the bracket/pocket
assembly with the screws included with
the radio. (Figure A)
3. Locate the factory wiring harness
and antenna plug in the dash. Metra
recommends using the proper mating
adapters from Metra and/or AXXESS.
4. Secure the assembly into the sub dash.
(Figure B)
5. Reassemble dash in reverse order of
disassembly using the radio trim panel
instead of factory panel. (Figure B)
KIT ASSEMBLY
(Figure A)
(Figure B)
ISO DDIN radio provision
1. Secure the radio brackets to the radio
with the screws included with radio.
(Figure A)
2. Locate the factory wiring harness
and antenna plug in the dash. Metra
recommends using the proper mating
adapters from Metra and/or AXXESS.
3. Secure the assembly into the sub dash.
(Figure B)
4. Reassemble dash in reverse order of
disassembly using 99-7346B trim panel
instead of factory panel. (Figure B)
(Figure A)
(Figure B)
REV. 4/26/2018 INST99-7346B
3