Publicidad
Idiomas disponibles
Idiomas disponibles
Introduction
Before Installing
Maintain an adequate air gap between the back of the display and any wall for
proper ventilation.
Ensure there is no direct airflow from air conditioning or heating vents blowing on
the display.
Avoid installing the display in places with high humidity.
Due to high power usage, always use power cords specifically designed for this
product.
Wall Mounting
Installing the Upper and Lower Wall Mount Brackets
1. Ensure the wall area and size is an appropriate installation site.
NOTE:
The height of the Upper Wall Mount Brackets must not be less than 78-3/4" (2
meters) from the ground.
2. Using the Wall Mount Bracket (pictured above) as a guide, mark at least six (6) holes
and pre-drill them.
3. Install the first Upper Wall Mount Bracket with the provided screws (M6x50mm Ex-
pansion for masonry; TA6x30mm for load bearing wood).
4. Repeat Step 2, ensuring the second Upper Wall Mount Bracket is level with the first
upper bracket.
1117.6
15
mm
50.8
mm
mm
1016
mm
812.8
mm
609.6
mm
406.4
mm
203.2
mm
7
mm
25.4
mm
6
50.8
mm
Publicidad
