DEALER SETUP INSTRUCTIONS
The mower as received from the factory is partially assembled and requires minimum time to
complete assembly and is ready for sale.
This mower is shipped vertically with shipping brackets. These shipping brackets are intended
for use in transporting the mower from the factory to dealer.
DO NOT use these brackets to store the unit. DO NOT store mower
vertically, the mower can fall over resulting in death or serious injury. To
avoid injury always store mower lying down on flat ground.
Assembly will be easier if components are aligned and loosely assembled before tightening
hardware. Refer to bolt torque chart in Maintenance Section. All bolts are grade 5 unless
other wise specified.
DO NOT attempt any assembly while the machine is still attached to the shipping
bracket and standing in the vertical position.
Serious injury or death could occur from the machine falling over.
Assembly must be performed with the machine placed on a hard level surface with
the shipping bracket removed.
2208 SERIES 05/21
© 2021 Alamo Group Inc.
ASSEMBLY
WARNING
Crushing Hazard
To avoid injury from
mower falling over:
DO NOT store mower
vertically on shipping
brackets.
Store mower lying down.
D454
Assembly Section 3-2
Shipping
Bracket