Fanimation LP8377LBL Manual De Instrucciones página 11

How to Wire Your Ceiling Fan (continued)
3. Connect wires using connectors as shown in
Figure 4.
RECEIVER HARDWARE USED:
WIRE
CONNECTORS
CAUTION: INCORRECT WIRE CONNECTION
COULD DAMAGE THIS RECEIVER.
L
N
AC POWER
L1
4. After connections have been made, put the
white and green leads to one side and the black
leads towards the other side, the connection
should be turned upward and carefully push leads
into the outlet box. The wires should be spread
apart with the grounded conductor and the
equipment-grounding conductor on one side of
the outlet box and the ungrounded conductor on
the other side. (Figure 5)
WARNING
The blades must be installed first before programming
is performed.
x 9
BLACK
WHITE
RED
HANGER
BRACKET
HANGER
BALL
Receiver
Check to see that all connections are tight,
including ground, and that no bare wire is
visible at the wire connectors. Do not operate
fan until the blades are in place. Noise and
motor damage could result.
BLUE
BROWN
GROUND
Figure 4
Green Wire
from Supply
(Ground)
Green Wire
from Hanger
Bracket (Ground)
Green Wire
from Receiver (2)
(Ground)
Green Wire
from Hanger
Ball (Ground)
11
WARNING
RED
GRAY
YELLOW
DC MOTOR
WHITE
RF ANTENNA
LIGHT KIT
White Wire
from Supply
Black Wire
from Supply
White Wire
from Receiver
Red Wire
Receiver
Black Wire
from Receiver
Figure 5
BLUE
Listed
Outlet Box
Household
Supply
from Supply