Publicidad
Idiomas disponibles
Idiomas disponibles
MaInTenance
Use only mild soap and damp cloth to clean
the tool. Never let any liquid get inside the tool;
never immerse any part of the tool into a liquid.
IMPorTanT: To assure product SAFETY
and rElIABIlITY, repairs, maintenance
and adjustment (other than those listed
in this manual) should be performed by
authorized service centers or other qualified
service personnel, always using identical
replacement parts.
acceSSorIeS
Recommended accessories for use with
your tool are available from your local dealer
or authorized service center. If you need
assistance regarding accessories, please call:
1-800-544-6986.
warnInG:
The use of any accessory
not recommended for use with this tool could
be hazardous.
The rBrc™ Seal
The rBrC™ (rechargeable
Battery recycling Corporation)
seal on the lithium-ion battery
(or battery pack) indicates that the costs to
recycle the battery (or battery pack) at the
end of its useful life have already been paid
by Black+Decker. In some areas, it is illegal
to place spent lithium-ion batteries in the
trash or municipal solid waste stream and the
rBrC program provides an environmentally
conscious alternative.
rBrC in cooperation with Black+Decker
and other battery users, has established
programs in the United states and Canada
to facilitate the collection of spent lithium-ion
batteries. Help protect our environment and
conserve natural resources by returning the
tool to an authorized Black+Decker service
center for recycling. You may also contact
your local recycling center for information on
where to drop off the spent battery, or call
1-800-8-BaTTery.
This Class B digital apparatus complies
with Canadian ICEs-003.
This device complies with part 15 of the
FCC rules. Operation is subject to the
following two conditions: (1) This device
may not cause harmful interference, and
(2) this device must accept any interference
received, including interference that may
cause undesired operation.
noTe: This equipment has been tested
and found to comply with the limits for
a Class B digital device, pursuant to
part 15 of the FCC rules. These limits
are designed to provide reasonable
protection against harmful interference in
a residential installation. This equipment
generates, uses and can radiate radio
frequency energy and, if not installed and
used in accordance with the instructions,
may cause harmful interference to radio
communications. However, there is no
guarantee that interference will not occur in
a particular installation.
If this equipment does cause harmful
interference to radio or television reception,
which can be determined by turning
the equipment off and on, the user is
encouraged to try to correct the interference
by one or more of the following measures:
• reorient or relocate the receiving antenna.
• Increase the separation between the
equipment and receiver.
• Connect the equipment into an outlet on
a circuit different from that to which the
receiver is connected.
• Consult the dealer or an experienced
radio/TV technician for help.
Changes or modifications to this unit
not expressly approved by the party
responsible for compliance could void the
user's authority to operate the equipment.
This Class B digital apparatus complies
with Canadian ICEs-003.
ServIce InforMaTIon
All Black+Decker service Centers are
staffed with trained personnel to provide
customers with efficient and reliable
power tool service. Whether you need
technical advice, repair, or genuine
factory replacement parts, contact the
Black+Decker location nearest you. To find
your local service location, call: 1-800-544-
6986 or visit www.blackanddecker.com
full Two-year HoMe uSe
warranTy
Black+Decker warrants this product for two
years against any defects in material or
workmanship. The defective product will be
replaced or repaired at no charge in either of
two ways.
The first, which will result in exchanges
only, is to return the product to the retailer
from whom it was purchased (provided
that the store is a participating retailer).
Returns should be made within the time
period of the retailer's policy for exchanges
(usually 30 to 90 days after the sale). proof
of purchase may be required. Please check
with the retailer for their specific return policy
regarding returns that are beyond the time
set for exchanges.
The second option is to take or send the
product (prepaid) to a Black+Decker owned
or authorized service Center for repair or
replacement at our option. Proof of purchase
may be required.
This warranty does not apply to accessories.
This warranty gives you specific legal rights
9
Publicidad
