Publicidad
Idiomas disponibles
Idiomas disponibles
1.
Plug in the sealer. Set the power switch to "on".
2. Adjust the timer to the minimum setting necessary for poly bag thickness.
3. Insert poly bag between pressing lips. Press the foot pedal to begin
sealing. (See Figure 6)
4. When the light turns off, sealing is complete. Wait one to two seconds to
allow the seal to cool, then release the foot pedal.
NOTE: Timer automatically controls sealing time.
NOTE: It is normal to leave the unit plugged in and turned on
between seals. Power is only used during sealing.
Impulse Power
Seal Width
Max. Seal Length
Max. Seal Thickness
Heat Time
Dimensions
PAGE 3 OF 12
MODEL
~0.2–1.7 sec.
Weight
27.75 x 15.75 x 35.5"
OPERATION
SPECIFICATIONS
H-86
H-87
520 W
380 W
2 mm
2 mm
24"
16 Mil
16 Mil
~0.2–1.7 sec.
75 lbs.
51 lbs.
15 x 13.75 x 35.5"
H-89
454 W
2 mm
12"
18"
16 Mil
~0.2–1.7 sec.
62 lbs.
21.25 x 15 x 35.5"
Figure 6
0423
Publicidad
