Publicidad
Fit the foot rails Cont...
D
(
)
Place the Foot Rails onto the vehicle's roof, lining up the mounting holes in the bottom of the Foot Rails
with the middle and rear mounting points on the vehicle. The Product Sticker must go to the rear of the
vehicle and must be facing outwards. Push the Foot Rails as far back as possible.
E
(
)
Secure the Foot Rails to the vehicle using eight M8 x 40 Hex Bolts, eight M8 Spring Washer and eight M8 x
19 Flat Washers (Items 2, 3, 4). Place a M8 Nut Cap (Item 1) over each Bolt Head once fastened.
( F )
Secure the front Spacers to the vehicle using the remaining M8 x 40 Hex Bolts, M8 Spring Washer and M8
x 19 Flat Washers. Place a M8 Nut Cap (Item 1) over each Bolt Head once fastened.
REV_A01
4
Product Sticker
Publicidad
