Publicidad
Fit the foot rails
A
(
)
Loosely join the Front and Rear Foot Rails (Items 14 & 15) together using the M6 x 16 Button Head Bolts,
M6 Flat Washers, M6 Nyloc Nuts and Joiner Plates (items 9, 10, 11, 12). Tighten all the Nuts and Bolts and
place a M6 Nut Cap (Item 13) over each Nyloc Nut.
B
(
)
Remove the two end caps, front and rear on each Roof Rail and undo the bolts as indicated by the arrows
securing the Roof Rails to the vehicle.
( C )
Remove the cover from the middle of each Roof Rail and undo the bolt as indicated by the arrow. Remove
the Roof Rails from the vehicle. Remove the two remaining bolts to expose the threaded mounting points
in the vehicle's roof.
REV_A02
3
Publicidad
