Publicidad
Fit the foot rails
A
(
)
Remove the two end caps, front and rear on each Roof Rail and undo the bolts as indicated by the arrows
securing the Roof Rails to the vehicle.
B
(
)
Remove the cover from the middle of each Roof Rail and undo the bolt as indicated by the arrow. Remove
the Roof Rails from the vehicle. Remove the two remaining bolts to expose the threaded mounting points
in the vehicle's roof.
( C )
Clean the area around each of the threaded mounting points and apply some silicone over each point.
Place three Spacers (Item 9) over each pair of mounting points front, middle and rear as shown. The
Spacers must be placed with the wider section towards the outside of the vehicle.
WIDER SECTION TOWARDS OUTSIDE OF VEHICLE
REV_A01
3
Publicidad
