KNOW YOUR SWEEPER
Hopper Bag
Rope
Bag Arm Tubes
Height Adjustment Handle
Height Adjustment Pin
Hitch Brackets
BRUSH HEIGHT ADJUSTMENT
To adjust your sweeper brushes to the best operating
height, pull back on the height adjustment pin and
use the height adjustment lever to raise tor lower the
brush. Best adjustment is when the brush setting is
1/2" down into the grass. Always mow the grass to an
even height before sweeping.
SWEEPING SPEED
Try a starting speed of approximately 3 m.p.h. (third
gear on most tractors). Depending on the conditions,
it may be necessary to adjust the sweeping speed in
order to achieve best results.
IMPORTANT: Do not exceed 6 mph. Excessive speed
may damage wheels and gears.
OPERATION
ROPE
HOPPER BAG
BAG ARM TUBE
Collects grass clippings, leaves and debris.
Permits dumping of hopper bag from the drivers seat.
Connects the hopper bag to the sweeper housing.
Adjusts the operating height of the sweeper.
Locks the height adjustment handle in desired position.
Connect the sweeper to the towing vehicle. Adjustable for various height tractor hitches.
HEIGHT
ADJUSTMENT
HANDLE
HITCH
BRACKETS
HEIGHT
ADJUSTMENT
PIN
DUMPING OF SWEEPER
Your sweeper can be dumped easily without getting off
of the rider or tractor. Simply pull the rope forward to
dump the hopper. Always empty hopper after each use.
CAUTION: Never attach the hopper rope to
any part of your body or clothing! Never hold
onto the rope while towing the sweeper!
Attach the rope to the towing vehicle to
keep it away from wheels and rotating parts.
CAUTION: Keep sweeper away from fire.
Excessive heat can damage the brushes
and hopper bag and could cause the bag
and its contents to burn.
13