Belkin OmniView SMB CAT5 Manual Del Usuario página 24

Installation
Connecting Servers to the SMB CAT5 KVM Switch
(Sun Server with MiniDIN8 Connection):
Step 1
Make sure your server is powered off.
Step 2
Using the Belkin OmniView SMB Server Interface Module for Legacy Sun
(F1DP101AeaAL), connect the VGA connector to the monitor port on your
server. (Refer to diagram below.)
Step 3
Connect the miniDIN8 connector to the miniDIN8 keyboard port on the
server. (Refer to diagram below.)
1
2
3
4
5
6
7
8
21