Cleaning And Maintenance; Removing And Installing The Spindle For Cleaning; Cleaning; Ordering Spare Parts - Hoffmann GARANT HiPo Clamp Manual De Instrucciones

7.

Cleaning and maintenance

7.1.

Removing and installing the spindle for cleaning.

DE
▶
▶
▶
▶
7.2.

Cleaning

▶
EN
▶
▶
▶
▶
Never clean the vice with compressed air.
Otherwise there is a risk of personal injury due to flying swarf.
FR
8.

Ordering spare parts

Only manufacturer-approved spare parts must be installed.
When ordering please state:
▶
▶
IT
Customer service:
Hoffmann GmbH Qualitätswerkzeuge
Haberlandstr. 55, 81241 Munich, Germany
ES
24
Removal: Undo the 2 knurled nuts on the side.
Rotate the bayonet pressure pad by 90°.
The spindle can be drawn out at the rear
with the jaws open.
Proceed in reverse order for installation.
Cleaning and maintenance are essential to the ongoing function of the
device.
Clean the lower part and the spindle.
Unscrew the spindle from the spindle nut and clean it.
Check the function of the wipers.
Oil all sliding surfaces, do not grease.
Type: Garant HiPO Clamp high clamping force machine vice
Item number 36 0465_125, 125 mm jaw width
36 0465_160, 160 mm jaw width