Publicidad
Idiomas disponibles
Idiomas disponibles
A. MOUNTING IN SLIDING WINDOWS
open the window halfway and mount the sealing plate from the kit vertically or horizon-
tally (18).
move the elements of the sealing plate, adjust the distance between the plates so that they
tightly fi ll the space created after sliding the window (Fig. 5), then lock with a screw, or cut
the plate to an appropriate length without a gap
Fig. 5
tighten the fl at end of the connector (16) of the hot air exhaust duct to the elliptical hole
(Fig. 6)
Fig. 6
CAUTION! The fl at end of the short hot air exhaust duct connector must snap into place.
OPERATING THE AIR CONDITIONER
1. Connect the properly assembled appliance to the mains with an earthing
pin. The connection will be signalled by a short beep. The LED displays (3h)
will show the temperature in the room.
Publicidad
