Troy-Bilt TB51BP Manual Del Operador página 8

Installing the Lower Blower Tube
1. Set the unit on a flat, level surface.
2. Align the tab on the lower blower tube with the hole on the
upper blower tube (Fig. 4).
3. Push the lower blower tube into the upper blower tube until the
tab locks securely into the hole (Fig. 4).
Installing the Nozzle
1. Set the unit on a flat, level surface.
2. Align the tab on the nozzle with the hole on the lower blower
tube (Fig. 5).
3. Push the nozzle into the lower blower tube until the tab locks
securely into the hole (Fig. 5).
Removing the Lower Blower Tube
1. Set the unit on a flat, level surface.
2. Firmly press the tab on the lower blower tube inward and pull
the lower blower tube out of the upper blower tube (Fig. 4).
Removing the Nozzle
1. Firmly press the tab on the nozzle inward and pull the nozzle out
of the lower blower tube (Fig. 5).
Adjusting the Throttle Grip
1. Put the unit on your back (Fig. 13).
2. Turn the wing nut counterclockwise to loosen the throttle grip
(Fig. 6).
3. Move the throttle grip to a location on the upper blower tube
that provides the best grip (Fig. 6).
4. Turn the wing nut clockwise to tighten the throttle grip securely.
Do not operate the unit with a loose throttle grip.
5. Take the unit off your back.
Upper Blower Tube
Lower
Blower Tube
Lower Blower Tube
Nozzle
8
Hole
Tab
Fig. 4
Hole
Tab
Fig. 5
Throttle Grip
Upper Blower Tube
Wing Nut
Fig. 6