LG LSDS6338F Manual Del Propietário página 14

UntitledBook1.book Page 14 Wednesday, December 8, 2021 9:37 AM
14 INSTALLATION
Tools Needed
Phillips screwdriver
a
Flat-blade screwdriver
b
1/4" nut driver
c
Pliers
d
Tape measure
e
Level
f
Adjustable wrench
g
Drill
h
Safety glasses
i
Gloves
j
Pipe wrench (2ea, one for support)
k
Parts
Parts Provided
Template (1)
a
Anti-tip bracket kit (1)
b
Anchor sleeves (6)
c
Lag bolts (6)
d
Parts Not Provided
4-Wire cord or 3-Wire cord (UL approved 40 or
a
50 AMP)
Strain relief (for conduit installations only)
b
Parts You May Need
• Gas line shut-off valve
• Pipe joint sealant that resists action of natural
and LP gases
• Flexible metal appliance connector (3/4" or 1/2"
NPT x 1/2" I.D.)
- Never use an old connector when installing a
new range.
• Flare union adapter for connection to gas supply
line (3/4" or 1/2" NPT x 1/2" I.D.)
• Flare union adapter for connection to pressure
regulator on range (1/2" NPT x 1/2" I.D.)
• Liquid leak detector or soapy water
• Lag bolt or 1/2" O.D. sleeve anchor (for concrete
floors only)
NOTE
• Observe all governing codes and ordinances.
• Have the installer show you the location of the
circuit breaker or fuse. Mark it for easy
reference.
• As when using any appliance generating heat,
there are certain safety precautions you should
follow.
• Be sure your range is installed and grounded
properly by a qualified installer or service
technician.
In the Commonwealth of
Massachusetts
• This product must be installed by a licensed
plumber or gas fitter.