Gossen MetraWatt METRAFLEX 6001XBL Manual De Instrucciones página 22

_______________________________________________________________
2. INTRODUCTION
The METRAFLEX are AC current probes utilising Rogowski
principle. They can be used to measure AC current up to 6000A
by being connected to an appropriate measuring device
(multimeter, data logger, power analyser etc.). The flexible probe
allows current measurements on conductors that are hard to
reach.
The probes provide an AC output voltage of 0...3V (METRAFLEX
6000/6001/6003) or 0...1.5V (METRAFLEX 6001XBL/6003XBL),
proportional to the current being measured with three selectable
ranges.
_______________________________________________________________
6
1
2
3
Fig 1
1. Probe Coupling
2. Probe Output Cable
3. Flexible Current Probe
4. Power On / Range Switch
5. RED LED – Overload
6. ORANGE LED – Low Battery
7. External Power Supply Input
8. Integrator Housing
9. Output Cable
7
8
2
4
5
6
9