Publicidad
Idiomas disponibles
Idiomas disponibles
______________________________________________________________
4.2
EXTERNAL POWER SUPPLY
Alternatively, the METRAFLEX can also be supplied by an
external DC voltage source (except METRAFLEX 3000). The
connection is made at the connector on the side of the electronics
housing. Supply voltage range, see Technical Data.
Polarity:
For safety reasons and to ensure the specified accuracy, the
current sensors should be supplied exclusively by using the
external power supply modules offered from us as an option.
Our Power Analysers MAVOWATT|50 und MAVOSYS 10 have a
power supply output for active current sensors.
MAVOWATT|50: Up to 4 pcs. METRAFLEX 3001 or 1 pc.
METRAFLEX 3003 and 1 pc. METRAFLEX 3001 can be supplied
by the 9V output named „Aux Supply". The required connection
cable is supplied with these current sensors. Take care when
connecting the plugs to the Aux. Supply jacks on the correct
polarity (color coding)!
MAVOSYS 10: Up to 3 pcs. METRAFLEX 6003XBL and 3 pcs.
METRAFLEX 6001XBL can be supplied by the 3V output on the
10 pin socket being located on the rear panel over the mains
switch. The required connection cables are available as
accessories: DC3VFLEX (117067-G1) for up to 4 pcs.
METRAFLEX; RR/PS/4A for expanding to another 3 pcs.
METRAFLEX.
_______________________________________________________________
(+ terminal)
(- terminal)
11
Publicidad
