Temperature Control - Domo DO990TDK Manual De Instrucciones

9. Carefully put the upper door in place. With the door closed, check that the door is aligned both
horizontally and vertically and that the seals are closed on all sides before fully attaching the top
hinge. Attach the upper hinge and the cover plate.
10. Reposition and adjust the feet to ensure that the appliance is level.
USE

TEMPERATURE CONTROL

The freezer is controlled with a temperature control knob located inside the appliance.
Adjust the control knob as desired to suit your individual preference. There are three
different setting, with MIN being the warmest and MAX the coldest.
· The running time and temperature are affected by where the freezer is located, how often the door is
opened and the temperature of the room the freezer is located in.
· When you use the appliance for the first time or after defrosting, adjust the control knob to the coldest
setting for at least 2 hours before introducing food to be stored, and then readjust to the middle
setting.
MOVING THE SHELVES AND DOOR RACK
· Empty the fridge before moving the shelves or the door racks.
· To move a shelf, raise it and pull it towards you.
· To move a door rack, grip it firmly with 2 hands. Raise the door rack and pull it towards you.
LIGHTING
The lighting in the freezer and the fridge are LED lights. These are more ecological and manufactured for
a long life. For this reason, these may not be replaced. If there is a problem with the lighting, contact a
qualified service centre in your area.
www.domo-elektro.be
39
DO990TDK