ENGLISH
After striking a foreign object. Inspect
u
the appliance for damage and make
repairs as necessary.
Residual risks
Additional residual risks may arise when
using the tool which may not be included
in the enclosed safety warnings. These
risks can arise from misuse, prolonged
use etc. Even with the application of
the relevant safety regulations and the
implementation of safety devices, certain
residual risks can not be avoided. These
include:
Injuries caused by touching any
u
moving parts.
Injuries caused by touching any hot
u
parts.
Injuries caused when changing any
u
parts or accessories.
Injuries caused by prolonged use of
u
the appliance.
When using any appliance for
prolonged periods ensure you take
regular breaks.
Impairment of hearing.
u
Health hazards caused by breathing
u
dust developed when using your
tool (example:- working with wood,
especially oak, beech and MDF.)
If operating the mower in a damp
u
location is unavoidable, use a residual
current device (RCD) with a tripping
current of not more than 30 mA.
Use of an RCD reduces the risk of
electric shock.
Never pick up or carry an appliance
u
while the motor is running.
10
(Original instructions)
Warning symbols
The following warning symbols are found
on the appliance along with the date
code:
Warning! Read the manual
prior to operation.
Do not expose the appliance
to rain or high humidity.
Beware of sharp blades.
Blades continue to rotate after
the motor is switched off.
Remove plug from mains
before maintenance or if cord
is damaged.
Beware of flying objects. Keep
bystanders away from the cut-
ting area.
Keep the cable away from the
cutting blades.
The blades will continue to
rotate after the machine is
switched off.
Directive 2000/14/EC
guaranteed sound power.
93
Electrical safety
Warning! This tool is double
insulated; therefore no earth wire
is required. Always check that
the power supply corresponds to the
voltage on the rating plate.
If the supply cord is damaged, it must
u
be replaced by the manufacturer or an