Publicidad
Idiomas disponibles
Idiomas disponibles
INSTALLING BATTERIES
1. Press down on latch and lift the battery cover to open the
battery compartment.
2. Install or replace 4 "AAA " sized batteries in the battery
compartment according to the indications inside the
compartment.
3. Close the battery cover by pushing in the top end of the
battery door .
Replace the batteries if:
• The weak battery symbol appears on the display.
• Nothing appears on the display when the power is switched on.
Note:
• Date and time will need to be reset if batteries are removed or
replaced.
• Replace all batteries at one time (as simultaneous set). Use only
1.5V "AAA" alkaline batteries.
• Remove batteries when unit is not in use for extended periods of
time.
• When the batteries are removed, the measurement values stored
in memory are retained. However, the date and time must be
re-set.
• Clean contacts on battery and in battery compartment with a soft
dry cloth each time you install batteries.
• Batteries are hazardous waste. Do not dispose of them
together with the household garbage.
12
Battery
Cover
Publicidad
