Beurer HK 49 Cosy Instrucciones De Uso página 14

4.2 Initial use
CAUTION
Ensure that the heat pad will not bunch up or become folded during use.
• First, connect the control to the heating pad by inserting the plug­in coupling.
• Then plug the mains plug into the socket.
• Place the heat pad on your stomach or back. Subsequently guide the long,
elastic rubber strap around the body and secure the heat pad by closing the
hook­and­loop fastener.
Use as a neck heat pad
• First assemble the plug­in coupling.
• Then place the heat pad in front of you
on a table so that the plug­in coupling is
located at the top left, and the pointed
side of the heat pad is directed towards
your body.
• Starting with the pointed side, tightly roll
up the heat pad along its entire width.
• Then place the completely rolled­up
heat pad around your neck and fasten
the hook­and­loop fasteners.
• The protruding rubber strap can be pushed underneath the heat pad at the front.
CAUTION
Make sure that the heat pad is rolled up tightly and fully. Otherwise, the safety system may irreversibly
switch off the heat pad.
4.3 Switching on
To switch the heat pad on, set the slider for ON/OFF and temperature settings to setting 1, 2 or 3.
The temperature settings are illuminated when switched on.
4.4 Setting the temperature
Level 0: OFF
Level 1: minimum heat
Level 2: medium heat
Level 3: maximum heat
NOTE:
The fastest way to warm up the heat pad is to initially set the highest temperature setting.
NOTE:
These heat pads have a fast heating function, which allows the pad to warm up faster in the first 10
minutes.
14