GLIDEAWAY Lifestyle Serie Manual De Instrucciones página 13

ASSEMBLY – BASE
Aux Cable
Note: If connecting two Twin XL bases to
use with one king size mattress, connect
the supplied green Aux cable between one
of the Audio plugs on both A Speakers.
7
Remove the Mattress Retainer Bar from
the bottom of the base. Finish removing
the plastic packaging from the base to
orient into final position. Carefully rotate
the base on its side, then lift and place on
legs. IMPORTANT: DO NOT LEAN THE
BED AGAINST THE INSTALLED LEGS TO
TURN OVER.
8
Insert the Mattress Retainer Bar upright
as shown.
9
Insert the Retainer Clip securely.
REMOTE
10
Lift the battery cover and insert the
three AAA size batteries (included)
into the remote as shown in the figure.
Replace the battery cover.
Remote is already linked with the base.
12