Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

OPERATION – MAIN
Press the FLAT (
will level. This action can be stopped at
any time by pressing another button.
Press the MEMORY A ( ) or MEMORY B
( ) button and the Head/Feet positions
will go to the preset position. This preset
can be changed as shown later. This
action can be stopped at any time by
pressing another button.
Press and hold the Flashlight (
button and the remote will act as a mini
flashlight. Release the button and after a
few seconds, the flashlight will turn off.
Use this feature to get out of bed without
disturbing your partner. Press the Light
( ) button and the LED lighting under
the bed will light. Press again to turn
the under-the-bed lighting off. The LED
under-bed lighting will turn off on it's
own after five minutes.
USB: This bed can charge standard
devices that utilize a USB cable. A pair of
USB jacks are located on each side of the
bed base. Simply plug a USB cable into
one of the USB jacks, and the other end
into the device you want to charge.
Notes:
• When a unit connected to the USB
jack is fully charged, remove the plug
from the USB jack.
• When a button is pressed on remote,
all buttons will light to make it easier
to view in low light conditions.
• EMERGENCY LOWERING: If you
cannot find the remote control,
locate and press the red Emergency
Lowering button located on the main
control box on the bottom of the bed
(shown to the left).
18
) button and the bed
)

Publicidad

Capítulos

Tabla de contenido
loading

Productos relacionados para GLIDEAWAY Lifestyle Serie

Este manual también es adecuado para:

Comfortbase elevation

Tabla de contenido