LG WM3400CW Manual Del Propietário página 21

Control Panel
Control Panel Features
Power On/Off Button
1
Press to turn the washer on. Press again to
turn the washer off. Pressing the Power button
during a cycle will cancel that cycle and any load
settings will be lost. The door will unlock after a
brief pause.
Cycle Selector Knob
2
Turn this knob to select the desired cycle.
Once the desired cycle has been selected, the
standard presets will be shown in the display.
These settings can be adjusted using the cycle
modifier buttons any time before starting the
cycle.
• To protect your clothing, not all settings are
available on all cycle selections.
Start/Pause Button
3
Press this button to start the selected cycle. If the
washer is running, use this button to pause the
cycle without losing the current settings.
• If Start/Pause is not pressed within a
certain time of selecting a cycle, the washer
automatically turns off and all cycle settings
are lost.
OPERATION_WM3400CW
6
Cycle Modifier Buttons
4
Use these buttons to adjust the water
temperature, spin speed and soil level settings
for the selected cycle. The current settings are
shown in the display. Press the button for that
option to select other settings.
Special Cycle and Option Buttons
5
Press these buttons to select special cycles
or additional cycle options. Certain buttons
also allow you to activate special functions
by pressing and holding the button for three
seconds.
Time and Status Display
6
The display shows the settings, estimated time
remaining, options, and status messages for
your washer. When the washer is turned on, the
default settings in the display will illuminate.
21
5