LG WM3400CW Manual Del Propietário página 27

Delay Wash
Once you have selected the cycle and other settings,
press this button to delay the start of the wash cycle.
Each press of the button increases the delay time by
1 hour, for up to 19 hours. Once the desired delay
time is set, press the Start/Pause button to start the
delay time.
NOTE
• If the Start/Pause button is not pressed to begin
the delay time, the washer will automatically shut off
after a certain time and all cycle settings will be lost.
Extra Rinse
This option will add an extra rinse to the selected
cycle. Use this option to help ensure the removal of
detergent or bleach residue from fabrics. Liquid fabric
softener, if used, is always dispensed in the final
rinse. Pressing the Extra Rinse button twice will add
two additional rinses to the cycle.
Pre-wash
A 15-minute prewash for clothes that are covered in
dirt or dust. This feature is suitable for heavily soiled
items. Press and hold the Extra Rinse button for 3
seconds
OPERATION_WM3400CW 27
Rinse+Spin
Select this cycle to rinse and spin a load separately
from a regular cycle. This can be helpful in preventing
fresh stains from setting in fabrics. You can change
the spin speed by pressing the Spin button.
1
Press the Power button to turn on the washer.
2
Press the Rinse+Spin button.
3
Press the Start/Pause button to start the cycle.
Control Lock
Use this option to disable the controls. This feature
can prevent children from changing cycles or
operating the machine. The feature does not lock
the door. Once the Control Lock is set, it must be
deactivated before any controls, except the Power
button, can be used. Once the washer has shut off,
the Power button will allow the machine to be turned
on, but the controls will still be locked. When the
controls are locked, will display alternately with
the estimated time remaining.
Locking/Unlocking the Control Panel
Press and hold the Rinse+Spin button for 3 seconds.
NOTE
• Turning off the power will not reset the Control Lock
function. You must deactivate Control Lock before
you can access any other functions.
• When Control Lock is turned on, you cannot operate
any buttons except the Power button.