Descargar Imprimir esta página

Zanussi ZFC639WAP Manual De Instrucciones página 13

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

Environment Protection
This appliance does not contain gasses which could
damage the ozone layer, in either its refrigerant cir-
cuit or insulation materials. The appliance shall not be
discarded together with the urban refuse and rubbish. The
Operation
Switching on
Insert the plug into the wall socket.
Turn the Temperature regulator clockwise.
The Pilot light will light up.
The Alarm light will light up.
Switching off
To turn off the appliance, turn the Temperature regulator
to the OFF position.
Temperature regulation
The temperature is automatically regulated.
To operate the appliance, proceed as follows:
•• turn the Temperature regulator towards
the minimum coldness.
•• turn the Temperature regulator towards
the maximum coldness.
Control panel
1
5
1
Pilot light
2
High temperature alarm light
3
Fast Freezing light
4
Fast Freezing switch
Alarm reset switch
All manuals and user guides at all-guides.com
to obtain
to obtain
2
3
4
insulation foam contains flammable gases: the appliance
shall be disposed according to the applicable regulations
to obtain from your local authorities. Avoid damaging the
cooling unit, especially at the rear near the heat exchang-
er. The materials used on this appliance marked by the
symbol
are recyclable.
A medium setting is generally the most suitable.
However, the exact setting should be chosen keeping in
mind that the temperature inside the appliance depends
on:
•• room temperature
•• how often the lid is opened
•• the quantity of food stored
•• the location of the appliance.
5
Temperature regulator
Fast Freezing function
You can activate the Fast Freezing function by pressing
the Fast Freezing switch.
The Fast Freezing light will light up.
This function stops automatically after 52 hours.
It is possible to deactivate the function at any time by
pressing the Fast Freezing switch. The Fast Freezing light
will switch off.
High temperature alarm
An increase in the temperature in the freezer (for example
due to an power failure) is indicated by switching on of
the Alarm light
During the alarm phase, don't place food inside the freez-
er.
When normal conditions are restored the Alarm light will
switch off automatically.
13

Publicidad

loading