SSS Siedle ELM 611-01 Manual De Instrucciones página 8

LED displays and their meaning
Red LED lights continuously.
Red LED lights continuously
but goes out after 15 seconds
Then the green LED lights
up continuously.
Red LED lights continuously.
When passing an EKC/EK 601-...
in front, the green LED flashes for
1 second.
Red LED lights continuously.
When passing an EKC/EK 601-...
in front, the red LED goes out,
the green LED lights continuously.
Green LED lights continuously.
Green LED lights continuously.
When passing an EKC/ EK 601-...
in front, the green LED flashes for
3 seconds.
Green LED lights continuously.
When passing an EKC/ EK 601-...
in front, the red LED flashes for
3 seconds.
Green LED lights continuously.
When passing an EKC/EK 601-...
in front, the green LED goes out,
the red LED lights up.
Green and red LEDs light up
alternately for 10 seconds, then
the green LED lights continuously.
Green and red LEDs light up
alternately for 10 seconds, then
the red LED lights continuously.
8
The master card has not been read
in, the ELM 611-... is still in its
default status.
The ELM 611-... was in the pro-
gramming mode and switched
after automatic timeout to the
operating mode.
The ELM 611-... is in the pro-
gramming mode. The green LED EK
confirms read-in of a
EKC/EKS 601-...
With the master card, you have
switched the ELM 611-... over
to the operating status.
ELM 611-... is in operating status.
ELM 611-... is in operating status.
The user key/card EKC/EK 601-...
is executing the required function.
ELM 611-... is in operating status.
The user key/card EKC/EK 601-...
has not been read in.
(no control entitlement).
You have switched the ELM 611-...
into the programming mode with
the master card.
After a cut in the power supply,
the ELM has returned to the
operating status.
After a cut in the power supply,
the ELM has returned to the
default status.