Publicidad
Idiomas disponibles
Idiomas disponibles
Estimated recording remaining time, Recording image quality (HD/STD), Frame rate
(60p/60i/24p) and recording mode (PS/FX/FH/HQ/LP) (44)
View Images button (35)
My Button (you can assign your favorite functions to icons displayed in this area) (73)
To record in mirror mode
Open the LCD panel 90 degrees to the camcorder
(), then rotate it 180 degrees to the lens side
().
A mirror-image of the subject appears on the
LCD screen, but the image will be normal when
recorded.
If white circular spots appear on photos
This is caused by particles (dust, pollen,
etc.) floating close to the lens. When they
are accentuated by the camcorder's flash,
they appear as white circular spots.
To reduce the white circular spots, light the
room and shoot the subject without a flash.
Notes
If you close the LCD screen while recording movies, the camcorder stops recording.
The maximum continuous recordable times of movies are as follows:
3D recording: about 6 hours 30 minutes
2D recording: about 13 hours
When a movie file exceeds 2 GB, the next movie file is created automatically.
The flash does not work while the
The following states will be indicated if data is still being written onto the recording media after recording
has finished. During this time, do not apply shock or vibration to the camcorder, or remove the battery or
AC Adaptor.
Access lamp (p. 27) is lit or flashing
The media icon in the upper right of the LCD screen is flashing
When [
Frame Rate] is set to [24p], you cannot record photos while the camcorder is in movie
recording mode.
US
(Movie) lamp is lit.
Publicidad
