Publicidad
TAILWHEEL INSTALLATION 3 POINT LIFT, SEMI MOUNT
1. Remove the Lift Arm Assemblies from the shipping position.
2. Place the Lift Arm Assembly to the axle assembly as shown n the illustration below and attach with two
U-bolts provided.
3. Install four 3/4" flatwashers, 3/4" lockwashers & 3/4" hex nuts - (2 per U-bolt) and tighten.
4. Remove the lug bolts from the hub and install the wheel assembly making sure the lug bolts are securely
tightened.
2310 SERIES 10/19
© 2019 Alamo Group Inc.
ASSEMBLY
AND PULL MODELS
TAILWHEEL ASSEMBLY
Lug Bolts
U-Bolts
Assembly Section 3-6
Lift Arm
Wheel Assembly
Assembly
3/4" Hex Nut
3/4" Lockwasher
3/4" Flatwasher
(4 Plc's.)
Publicidad
