Publicidad
Filter
Spacer
Hose
Manguera
Tuyau
Cover (Suction Inlet)
Cubierta
(Abertura de aspiración)
Couvercle
(Entrée d'aspiration)
Short Hose
Manguera corta
Tuyau court
Agitator Assembly
Agitator Shaft
Agitator Pulley
End Caps
Removing Clogs
Short Hose
Manguera corta
Tuyau court
Agitator
Brush
Body
The hose located on the back of the
vacuum cleaner carries the dirt from the
nozzle up to the dust bag. If the hose
should become clogged:
➢ ➢ Unplug vacuum.
➢ ➢ Pull open suction inlet cover and
check for clogging.
➢ ➢ Disconnect wand from short hose
and check wand and hose.
➢ ➢ Plug in vacuum cleaner and turn on.
➢ ➢ Disconnect wand and stretch hose in
and out to remove clog.
➢ ➢ If clog still exists, turn vacuum
cleaner OFF and UNPLUG POWER
CORD.
➢ ➢ Remove lower plate.
➢ ➢ Remove short hose from nozzle by
lifting straight up.
➢ ➢ Inspect hose end and clear any
obstructions.
➢ ➢ Reinstall short hose and lower plate.
- 40 -
Filter
E- Clip
Agitator Holder
Publicidad
