Changhong EF24F898SD Manual Del Usuario página 13

Menu Operation
How to Navigate Menus
Before using the TV follow the steps below to learn how to navigate the menu in order
to select and adjust different functions. The access step may differ depending on the
selected menu.
1. Press the MENU button to display the main menu.
2. Press the◄/►button to cycle through the main menu.
3. Press the▲/▼button to select the desired sub item.
4. Press the ENTER button to access the submenu.
5. Press the ▲/▼/◄/► button to select the desired value. The adjustment in the
OSD may differ depending on the selected menu.
6. Press the MENU button to return to the previous menu.
7. Press the EXIT button exit from the menu.
NOTE:
When an item in MENU is displayed gray, it means that the item is not available or
cannot be adjusted.
Buttons on the TV have the same function as corresponding buttons on the remote
control. If your remote control is lost or couldn't work, you may use the buttons on the
TV to select menus. This manual focuses on operation of the remote control.
Configuring the Channel Menu
• Antenna
Selecting an antenna
* When TV signals is Air.
• Auto tuning
Select the ENTER button to start Auto
tuning.
1. Select the country and tune type for
channels.
2. The TV will begin memorizing all of the
available channels.
Once the progress bar is full, the found
channels will be stored and the unit will
proceed to the search for TV, DTV, Radio
and Data.
If you press the MENU button in TV searching, the Auto tuning will skip to DTV
searching as the suggestive picture shows.
• DTV Manual Tuning
Manual store for digital channels.
Press the ◄/►button to select channel. Press the ENTER button to search.
When a channel is found, the searching process will stop, the channel will be saved
with current channel number.
If the program is not your expected one, please press the ◄/►button to continue the
searching. Press the EXIT button to exit.
source.
11