Introduction; Receiving Your Shipment; Ordering Information; Accessories And Replacement Parts - Chauvin Arnoux CA 7028 Manual De Instrucciones

1. INTRODUCTION

WARNING
This instrument meets the safety requirements of IEC61010-1:1995.
The Model CA7028 is designed for use on de-energized circuits only.
Connection to line voltages will damage the instrument and could be
hazardous to the operator.
This instrument is protected against connection to telecom network
voltages according to EN61326-1.
Safety is the responsibility of the operator.
International Electrical Symbols
This symbol signifies that the instrument is protected by double or reinforced
insulation. Use only specified replacement parts when servicing the instrument.
This symbol on the instrument indicates a WARNING and that the operator must
refer to the user manual for instructions before operating the instrument. In this
manual, the symbol preceding instructions indicates that if the instructions are not
followed, bodily injury, installation/sample and product damage may result.
Risk of electric shock. The voltage at the parts marked with this symbol may be
dangerous.
26
1.1

Receiving Your Shipment

Upon receiving your shipment, make sure that the contents are consistent with the packing
list. Notify your distributor of any missing items. If the equipment appears to be damaged, file
a claim immediately with the carrier and notify your distributor at once, giving a detailed
description of any damage. Save the damaged packing container to substantiate your
claim.
Caution ! if you ship this instrument on elsewhere, use preferably the original packaging
and indicate the reasons for reshipment as clearly as possible in a note enclosed with the
equipement.
Note : our products are patented in France and Abroad. Our logos are registrered trade
marks.
E reserved the right to modify the characteristics and prices should technological advances
make it necessary.
1.2

Ordering Information

Wire Mapper Pro™ Model CA7028 .................................................................. P01129501
Includes meter, carrying case, remote ID (#1), 2 patch cords, 4 x 1.5 AA batteries, user
manual and a product warranty card.
1.2.1

Accessories and Replacement Parts:

Wire Mapper Pro™ Remote IDs (#2-5) ............................................................... P01101992
Wire Mapper Pro™ Remote IDs (#6-9) ............................................................... P01295233
Cable Tone Trace .................................................................................... (consulut factory)
1.2.2

Replacement parts

Wire Mapper Pro MT remote ID #1 ........................................................................ P01101992
2 patch cords RJ45 CA 7028 ............................................................................. P01295233
27