Fanimation Cancun Manual Del Propietário página 10

Light Kit Assembly—FP8011OB ONLY
1. Install included candelabra bulbs into each of the three
sockets. (Figure 23)
CAUTION
To reduce the risk of electric shock, disconnect
the electrical supply circuit to the fan before
installing light kit.
Use only with light kits marked suitable for use in
Damp Locations.
2. disassemble the finial, trim cover and nut. Then
secure glass bowl to light fitter using supplied nut.
Next, install trim cover followed by the finial. Do not
over tighten. (Figure 24)
3. Install pull chains and fobs. (Figure 25)
10
Figure 23
Figure 24
Figure 25