Descargar Imprimir esta página

KTM 95812955044 Instrucciones De Montaje página 29

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

Clamp the cartridge into a bench vise.
Clamping stand (T14015S)
Pull the spring downward and push the open end wrench
onto hexagonal part
Open end wrench (T14032)
Hold hexagonal part
Ring wrench (T14091)
501595-01
Remove the special tools.
Remove spring
Info
The upper preload spacer usually becomes stuck in
the screw cover.
Info
The large 50 mm bushing is not reused
Unclamp the cartridge.
501596-01
Disassembling the cartridge
The steps are the same for both cartridges.
Clamp the cartridge with the special tool.
Clamping stand (T14015S)
Press in pressure stage unit
Remove lock ring
501598-01
Remove pressure stage unit
Unclamp the cartridge.
501597-01
Turn off fluid barrier
501599-01
8
.
8
and remove screw cap
9
bk
with preload spacers
.
bl
.
bm
.
bl
.
bn
and remove it.
ASSEMBLY 5
6
.
9

Publicidad

loading