Descargar Imprimir esta página

KTM 95812955044 Instrucciones De Montaje página 31

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

Assembling the fork legs
The operations are the same on both fork legs.
Clamp the cartridge vertically.
Clamping stand (T14015S)
Position spring
small preload spacer
The tight coil of the spring is mounted at the bottom.
Mount the open end wrench on the hexagonal part.
501603-01
Open end wrench (T14032)
Mount screw cap
Hold screw cap
Guideline
Nut, piston rod on
screw cover
Ring wrench (T14091)
Remove the special tools.
Clamp the inside fork tube using an axle clamp.
Guideline
Use soft jaws.
Slide the cartridge into the inside fork tube.
501308-01
Mount and tighten screw
Guideline
Cartridge screw
501593-01
Clamp the fork leg vertically.
Guideline
Use soft jaws.
Fill with fork oil.
Fork oil per fork leg
501212-01
9
2
with preload spacer
(included) and
bk
.
6
all the way to the stop.
6
and tighten hexagonal part
M12x1
25 Nm
(18.4 lbf ft)
7
with the washer.
M10x25
25 Nm
(18.4 lbf ft)
455 ± 5 ml
Fork oil (SAE 4)
(15.38
(48601166S1)
± 0.17 fl. oz.)
(
p. 14)
ASSEMBLY 5
8
.
11

Publicidad

loading