Descargar Imprimir esta página

MiLECTRIC RCM-231W Manual De Instrucciones página 39

Ocultar thumbs Ver también para RCM-231W:

Publicidad

Idiomas disponibles

Idiomas disponibles

Then rinse with warm water using a wet sponge or cloth. Wash baskets and shelves in
warm soap and water and dry them thoroughly before
putting them back in the
refrigerator/freezer.
The
external parts of the refrigerator/freezer
can be cleaned
with wax polish.
Before connecting YOU MUST
Check that
you have
a
plug
compatible
with
the
plug
supplied
with
the
refrigerator/freezer.
Before you turn on!
The coolant
needs time to settle. If the appliance is turned off, wait
30 minutes before
re-igniting it to allow the coolant
to settle.
Before you fill your refrigerator/freezer
Before storing food in your refrigerator/freezer, turn on the refrigerator/freezer and wait
24 hours, to make sure it is working properly and for the refrigerator/freezer to drop
to the correct temperature.
Electrical
connection
~DANGER~
Improper use of the grounded plug can result in a risk of electric shock. If the power cord
is damaged, replace it with another at an authorized service center.
This refrigerator must be properly
grounded
for your safety. This refrigerator's
power cord is equipped with a three-pin plug that
connects with standard
three-
pin wall sockets to minimize the possibility of an electric shock.
Do not cut, in any case, the third ground plug of the supplied power cord.
This refrigerator requires a 230 A (230~240)
V A.C outlet.
~/50Hz with three-
pointed ground.
This refrigerator is not designed to be used with an inverter.
The cord must be secured behind the refrigerator and not left exposed or hanging to
avoid accidental injuries.
Never unplug the refrigerator by pulling the power cord. Always hold the plug firmly
and pull
out the receptacle.
Do not use an extension cable with this device. If the power cord is too short, ask a
qualified electrician or service technician
to install a power outlet near the
appliance. Using an extension cable can adversely affect the performance of the drive.

Publicidad

loading