Descargar Imprimir esta página

MiLECTRIC RCM-231W Manual De Instrucciones página 41

Ocultar thumbs Ver también para RCM-231W:

Publicidad

Idiomas disponibles

Idiomas disponibles

The temperature modes cycle as following: "5→4→3→2→1→FAST COOL→5"
5
COLDEST
4
3
2
1
COLD
The Freezing temperature control
Freezer temperature control
The freezer temperatures are controlled by the knob switch (as illustrated on
the right) in the following manner:
When the temperature mode keeps unchanged, turn the temperature control
knob switch clockwise, then the refrigerator temperature decreases while the
freezer temperature gets increased.
When the temperature mode keeps unchanged, turn the temperature control
knob switch anticlockwise, then the refrigerator temperature increases while the
freezer temperature gets decreased.
It is recommended to adjust the temperature control knob switch to the middle
position. When you need a lower freezer temperature, turn the temperature
control knob switch properly in the anticlockwise direction to decrease the
freezer temperature (note that the refrigerator temperature will increase concurrently). When the temperature
satisfies the need, be sure to turn the control knob switch back to the middle position in a timely manner.
The fridge thermostat and the temperature control knob should be used in combination.
Use
Recommended
environment
settings
Higher
than
35℃
16℃-35℃
Lower
than
16℃
When the ambient temperature around the refrigerator is higher than 35 ℃, do not set the thermostat at Mode 5 and
adjust the temperature control knob to the leftmost position, so as not to affect the normal refrigeration of the
refrigerator.
Do not set the thermostat at Mode 5 and adjust the temperature control knob to the rightmost position, in order to
avoid the fridge compartment undercooling.
When the user needs a colder temperature.
When in normal use.
When the user does not need a colder temperature.
Temperature adjustment
panel
mode
Recommended
positions
温度调节
knob
switch
Tips
1) It is recommended to set at
the middle mode.
2) The temperature mode can
be adjusted as recommended
in the left table in case of
change
temperature
refrigerator.
to
the
ambient
around
the

Publicidad

loading