Descargar Imprimir esta página

MiLECTRIC RCM-231W Manual De Instrucciones página 40

Ocultar thumbs Ver también para RCM-231W:

Publicidad

Idiomas disponibles

Idiomas disponibles

begin
Control system
Control mode: the electronic
and temperature sensor to collect the difficult-to-control temperature; The
is on the back
of the device; The
the refrigerator and uses LED light.
1, Control
Panel: Contains a model of switched power supply with output loads,
including
compressor, heater, motor and LED lamp, etc., and input loads, including
sensor, refrigerator thawing sensor, and display keys.
2, In spring and autumn the temperature ranges between 16-35 °C. With the SET button,
you can set the temperature to 4 or 6 speeds, the air
be placed in the medium position.
3, In summer especially the temperature is
set to 2, the air
volume
4, In winter (16 °C and less) to adjust the temperature,
the regionor intermediate between theminimum and, preferably, a minimum or
almost the minimum position.
FAST COOL
1, When you need to quickly cool hot food, you can select the "FAST
COOL" button.
Note: After
previous range operation, at the end of the "FAST COOL" function;
schematics
air cooling
display panel is in the upper compartment of
control lever is adjusted to the maximum.
2-3 hours, the refrigerator will automatically adjust to the
control mode uses the control card
volume
above 35 °C, the temperature is
air volume control lever to
control board
control lever
can

Publicidad

loading