Oregon PS250 Manual De Instrucciones Original página 25

OREGON® Cordless Tool System
POLE SAW MODEL PS250
• Thick limbs (greater than 4 inches in
diameter) can splinter or pinch the chain
when making a single cut from the top
To avoid pinching or splintering (Fig 32),
first make one shallow relief cut on the
bottom surface of the limb (1), then cut
the limb all of the way through from the
top of the limb (2)
FiG. 32
(2)
(1)
• After most of the limb has been
removed, make one smooth cut near
the trunk (Fig 33)
FiG. 33
AC 1113 - F/N 563397
OPErATiNG THE POLE SAW
23