Home Decorators Collection 34545-HBUN Manual De Instrucciones página 9

Assembly - Standard Ceiling Mount (continued)
6
Making the electrical connections
To avoid possible electrical shock, ensure
WARNING:
the electricity is turned off at the circuit breaker or main
fuse box before wiring.
Check to see that all connections are tight,
WARNING:
including the ground, and that no bare wire is visible at
the wire nuts, except for the ground wire.
Follow the steps below to connect the fan to your house
supply wires. Secure the wire nuts (DD) supplied with your
fan by wrapping the connections with electrical tape.
□ Connect the black (live) wire from the ceiling to the
black wire and blue wire from the fan motor assembly (G).
□ Connect the white (neutral) wire from the ceiling to
the white wire from the fan motor assembly (G).
Connect the ground conductor of the 120-VOLT supply
□
(this may be a bare wire or a wire with green colored
insulation) to the green ground lead(s) of the fan.
There are two green grounding leads: one from the
mounting bracket (B) and one from the hanger ball/
downrod assembly (E).
□ Secure the wire connections with plastic wire nuts
(DD) provided with the electrical hardware.
□ After connecting the wires, spread them apart so that
the green and white wires are on one side of the
outlet box (1) and the black and blue wires are on the
other side. Carefully tuck the wire connections up
into the outlet box (1).
DD (X3)
9
Please contact 1-800-986-3460 for further assistance.
Black
Green
White
Black Blue
E
HOMEDEPOT.COM/HOMEDECORATORS
1
B
G