Kohler K-T10582 Guia De Instalacion página 3

Tools and Materials
Assorted Strap
Screwdrivers Wrench
Thank You For Choosing Kohler Company
We appreciate your commitment to Kohler quality. Please take a few
minutes to review this manual before you start installation. If you
encounter any installation or performance problems, please don't
hesitate to contact us. Our phone numbers and website are listed on
the back cover. Thanks again for choosing Kohler Company.
Before You Begin
CAUTION: Risk of product damage to the K-306-KS valve
assembly. When using this valve in a fiberglass or acrylic
installation, use the Thin Wall Installation Kit (88526).
Observe all local plumbing and building codes.
The finished wall or bath/shower unit must be installed prior to
installing this trim.
We recommend that you determine if the maximum water
temperature is acceptable before installing this trim. If
temperature adjustment is needed, refer to the "Water
Temperature Adjustment" section.
The valve shuts off by water pressure. Do not force the handle in
any direction. To turn the valve off, gently turn it to the "Off"
position.
Shut off the main water supply.
If the wall thickness is greater than 3/4" (1.9 cm), use the Deep
Rough-in Kit (1025388) to add 3/4" (1.9 cm) of depth to the
handle assembly.
Kohler Co. reserves the right to make revisions in the design of
products without notice, as specified in the Price Book.
Kohler Co.
Plumbers Thread Hex Wrench
Putty Sealant
3 1036173-2-A