3. USER INTERFACE
3.1 Local Access
Connect your USB mouse to one of the USB ports on the front panel, and check if there's a mouse icon (
screen, indicating the USB mouse is detected properly.
Move your mouse to enter the password with the password keypad. The default user name and password are both
"admin". The status will be changed from
Note: You may configure four different user levels to have different access privileges in "SYSTEM"
"ACCOUNT". For details, please refer to "4.3 User Level Creation" at page 13.
Password Input
3.2 Local
3.2.1 Device Status
Note: The functions shown may vary based on the model or the access user level you use.
Key lock
Channel lock
USB flash drive / device connected
Timer record on
Overwrite on
Sequence mode on
PTZ mode on
Backup event queued and USB flash drive needed
CPU loading
Network Status:
(WAN) Internet connected
(WAN) Local connection
(LAN) Auto mode –Mbit/s
(LAN) DHCP / Static IP mode
3.2.2 Channel Status
Note: The functions shown may vary based on the model or the access user level you use.
Auto search on
Live audio on
Recording
Live information
Quick camera control
All manuals and user guides at all-guides.com
(key lock) to
Auto search off
Audio off
PTZ control
Playback information
10
(unlock).
Key unlock
Channel unlock
No USB device connected
Timer record off
Overwrite off
Sequence mode off
PTZ mode off
USB flash drive full
(WAN) Internet disconnected
(LAN) Auto mode – Gbit/s
(LAN) Camera disconnected
Original size
Audio playback on
Alarm event
Digital zoom
USER INTERFACE
) on the
Fit to screen
Audio playback off
Motion event
Channel Playback