Avtech AVH304 Manual De Instrucciones página 33

5.4.3 DETECTION
CONNECTION CH1
CAMERA
ALARM
DETECTION
SENSITIVITY
ALERT MOTION
NETWORK AREA
DISPLAY INTERNAL ALARM
RECORD
NOTIFY
EXIT
1) ALARM
Select N.C./ N.O depending on your installation need. The default alarm value is OFF.
2) SENSITIVITY
Select the detection sensitivity of the selected channel, the lower the value, the higher the sensitivity.
3) MOTION
Select if you want to activate the motion detection function for the selected channel (ON/OFF).
4) AREA
Click "EDIT" to set the motion detection area.
There are 16 × 12 grids per camera for all channels. Pink blocks represent the area that is not being detected
while the transparent blocks are the area under detection.
Note: To exit area setting and return to the detection page, right click your mouse.
5) INTERNAL ALARM
This function appears only when the camera connected supports human detection.
Select "ON" to enable human detection, or "OFF" to disable it.
5.4.4 ALERT
CONNECTION
EXT. ALERT
CAMERA
INT. BUZZER
DETECTION KEY BUZZER
ALERT VLOSS BUZZER
NETWORK MOTION BUZZER
DISPLAY ALARM BUZZER
RECORD HDD BUZZER
NOTIFY
ALARM DURATION (SEC)
HDD NEARLY FULL (GB)
HDD OVERHEAT ALERT (°C)
EXIT
1) EXT. ALERT
Select to enable or disable the sound when any external alarm is triggered (ON / OFF).
2) INT. BUZZER
Select to enable or disable the sound (ON / OFF) for all internal buzzers: KEY BUZZER, VLOSS BUZZER,
MOTION BUZZER, ALARM BUZZER, and HDD BUZZER.
Note: When this item is set to "OFF", item 3) to item 7) will be disabled even though they are set to ON.
3) KEY BUZZER
Select to enable or disable the sound when pressing the buttons on the front panel (ON / OFF).
All manuals and user guides at all-guides.com
ADVANCED CONFIG
CH2 CH3 CH4
(For selected camera models only)
ADVANCED CONFIG
OFF
0
ON
EDIT
ON
ON
OFF
ON
ON
ON
ON
ON

5

5

60
27
MAIN MENU