Publicidad
Idiomas disponibles
Idiomas disponibles
All dimensions in inches unless otherwise specified.
Description
Engine Type
Operation Pressure Range
Maximum Operation Pressure
Fastener Type
Fastener Gauge
Fastener Range
Magazine Capacity
Length
Width
Height
Weight
Operating Pressure:
70 to 120 p.s.i.g. (4.9 to 8.43 kg/cm
performance.
DO NOT EXCEED THIS RECOMMENDED OPERATING PRESSURE.
Air Consumption:
The DA1564K requires 4.2 cubic feet per minute or C.F.M. (118.9 liters per minute or LT/MIN) of free air at
80PSI (5.6 kg/cm
2
) to operate at a rate of 100 fasteners per minute. To determine the appropriately sized air
compressor, take the actual rate at which the tool will be run and compare the required C.F.M. (LT/MIN) to the
compressors free air delivery (C.F.M./ LT/MIN) at 80 PSI (5.6 kg/cm
For example, if your fastener usage averages 30 fasteners per minute, you need 30% of the tools C.F.M.
required to operate the tool at the rate of 100 fasteners per minute. In this case, be sure that your air
compressor can deliver a minimum of 1.26 C.F.M. (35.6 LT/MIN) at 80 PSI (5.6 kg/cm
performance.
Tool Model
DA1564K
*Visit www.BOSTITCH.com for further details.
NOTE:
BOSTITCH tools have been engineered to provide superior customer satisfaction and are designed to achieve
maximum perfomance when used with precision BOSTITICH fasteners engineered to the same exacting
standards. BOSTITCH cannot assume responsibility for product performance if our tools are used with
fasteners or accessories not meeting the specific requirements established for genuine BOSTITCH
fasteners and accessories.
DA1564K
DA15ga Angled Finish Nailer
Oil-Free
70-120 PSI (4.9 to 8.43kg/cm
120 PSI (8.43 kg/cm
DA15 Series
15 Gauge
1-1/4" – 2-1/2" (31mm – 63mm)
100
12-9/16" (319.5mm)
3-5/8" (92mm)
11-13/16" (300mm)
4.15 lbs. (1.8kg, Including fitting)
2
). Select the operating pressure within in this range for best fastener
Fastener Type
DA Type Angled Finish Nails
TOOL SPECIFICATIONS
2
)
2
)
2
).
FASTENER SPECIFICATIONS
Fastener SKU
DA1520
DA1524
DA1532
DA1540
-5-
2
) for optimum
Gauge
Length
15
1-1/4" (31mm)
15
1-1/2" (38mm)
15
2" (50mm)
15
2-1/2" (63mm)
Publicidad
