Publicidad
Remove the Rubber Pad, located at the base of the Desk
5.
Clamp. (Figure 3)
Remove the Screws (x4), located at the base of the Desk
6.
Clamp, using the 4mm Hex Key, and remove the Desk
Clamp.
Align the holes in the Grommet Plate with the holes in the
7.
Pole Assembly.
Insert the Screws (x4), removed in step 6, through the
8.
Grommet Plate and into the Pole Assembly and tighten,
using the 4 mm Hex Key. (Figure 4)
Affix the Rubber Pad to the Grommet Plate to complete
9.
the Grommet Mount Pole Assembly.
Position the Grommet Mount Pole Assembly over a
10.
Grommet Hole.
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
Rubber Pad
Figure 3
Figure 4
6
4 mm Hex
Key
Publicidad
